Document A Construction by maccabee Shelley
May 16th, 2006 12:17 PMThe pictures have step-by-step directions. In the example i only made about 40 stickers, but it is much more efficient to do a couple hundred at a time.
Cutter
the rotary cutter at kinkos that can be used for free
Vinyl
the vinyl that sells for about $1.50/foot. One foot of red yeilds about 120 stickers and one foot of white yeilds about 400 stickers
Measure red
measure 1.75" strips of vinyl. i dont trust the square of the cutter so i measure both sides
Cut
line up your measurements on the cutting edge. hold the vinyl sheet in place and cut SONY
Measure White
measure strips of white that are a little bigger than 1/4"
Apply stripe
start to peel of the backing of the white strip
Apply stripe
apply the strip about a 1/8" from one side. try to keep it straight but if you get a little off slowly angle it back to square
Apply stripe
Measure
stack up to 6 strips and mark every 1.25"
Measure
Cut
Stack 2 or 3 strips and cut on your marks starting with any slag
Cut
Stack 2 or 3 strips and cut on your marks
Tha Prawduct
